Introduction - Tandy 1200 HD User Manual

4.1 INTRODUCTION
A wide variety of options can be installed in your system unit.
The installation of an option may affect the warranty on your com-
puter, so read your warranty information and consult your dealer if
you have questions.
This chapter provides guidelines and procedures that apply to the in-
stallation of a wide variety of options. For detailed instructions, you
should refer to documentation provided by the manufacturer of your
option.
Section 4.2 gives instructions on how to prepare your system unit
for the installation of options. Section 4.3 gives guidelines for the
installation of option cards in their slots. Section 4.4 provides a ta-
ble giving switch settings and jumper configurations for various op-
tions. Section 4.5 gives instructions on how to prepare your system
unit for use after an option has been installed.
In general, the information presented in this chapter should take
precedence over the information provided by the manufacturer of an
option. If these two sources of information seem to be in conflict,
you may wish to contact your dealer before you begin the installa-
tion procedure.
Coprocessors and memory integrated circuits are typically supplied
without documentation. This manual, therefore, provides instructions
for the installation of these options.
4 - 1