Tandy 1200 HD User Manual page 141

NOTE
THE ILLUSTRATIONS IN THE FOLLOWING PROCE-
RIOR LAYOUT OF YOUR COMPUTER; THEY ARE
PROVIDED AS EXAMPLES ONLY.
DURE MAY NOT ACCURATELY DEPICT THE INTE-
1. Once you have removed the cover from the system unit,
locate any main circuit board switches, jumpers, sockets,
etc., that will be used during memory module installation.
Remove the mounting screws from any circuit cards that
block access to these items. Remove the cards. Set the
screws aside for use when you reinstall the circuit cards.
8
NOTE
CERTAIN CIRCUIT CARDS MAY BE ATTACHED TO
THE SYSTEM UNIT BY ONE OR MORE CABLES.
YOU SHOULD NOT DISCONNECT THESE CABLES
AT EITHER END. SIMPLY SLIDE THE CARDS UP
AND OUT OF THEIR SLOTS. THEN LAY THEM
ASIDE WITH CABLES STILL ATTACHED. DO NOT
STRAIN THE CABLES.
4 - 15