Removing Pallet
Shipping Brackets
Thermo Scientific
Installation and Start-Up
Section 1
Models 416 and 430 Orbital Incubator Shakers are supplied with the
following materials:
1 - T-handle 5/32" hex socket wrench
2 - Platform alignment studs 1/4-20
6 - Grade 8, 5/32" hex socket flat head screws (provided w/ platform)
1 - Screwdriver for flask clip installation and removal
1 - Line cord set
Warning This shaker is heavy! The weight of the Model 416/430 is 138
lbs. (62.7kg). Place this unit on a support surface which will accommodate
the weight and operating motion of this shaker. Have assistance available
when moving it.
▲
Figure 1-1. Front View
The Orbital Shaker is secured to its shipping pallet with two brackets, one
on each side of the frame. Remove these brackets when the unit is
unpacked by unhooking them from the shaker frame.
Figure 1-2. Pallet Shipping Bracket
Orbital Shakers
1-1