Related Manuals for MadgeTech BRIDGE101A
Summary of Contents for MadgeTech BRIDGE101A
- Page 1 BRIDGE101A Bridge/Strain Gauge Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Device Operation 3 Device Maintenance 4 Need Help?
- Page 2 * MadgeTech recommends using 350 or 1000 Ω strain gages. 120 Ω strain Real Time Start stores the dataset as it records while gauges can be used with the Bridge101A but it is not recommended as it connected to the logger.) will reduce the battery life, potentially increase noise level and limit the 5.
- Page 3 1. Select Alarm Settings from the Device Menu in the • To stop the device: Press and hold the pushbutton for MadgeTech Software. A window will appear allowing to 5 seconds, the red LED will flash during this time. The set the high and low alarms and warning alarms.
- Page 4 NEED HELP? Product Support & Troubleshooting: • Visit our Resources online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software.