Controlling Ptz Cameras – Via Network - Setup - Dahua Technology NKB1000 Manual

Suppose the IP address of the PTZ
camera is 10.15.7.3, port is 37777,
password of admin is "qwerty".
Then we should add a "zone" in the
keyboard as follows:
ID: 1
Name: Door1
Type: SD
Link: NET
IPAddr: 10.15.7.3
Port: 37777
Rule: DH-2
PW: qwerty
Controlling PTZ Cameras – Via Network - Setup
Note: you can set any ID or Name, but should set other parts based
on the actual settings of the PTZ camera.
Network connection is only available for NKB1000.
Network