Chapter 4 - Fcc And Industry Canada Information; Fcc Grant Parts 22 And 24; Industry Canada - Multitech SocketModem Cell Device Manual

CHAPTER 4 – FCC AND INDUSTRY CANADA INFORMATION
Chapter 4 – FCC and Industry Canada Information
The following is device specific FCC and Industry Canada information. For additional approval and regulatory
information, see the Universal Socket Developer Guide (S000342).

FCC Grant Parts 22 and 24

FCC Identifier
Equipment Class
Notes
Modular Type:
FCC Rule Parts Frequency Range (MHz) Output Watts Frequency Tolerance
22H 824.7 - 848.31
24E 1851.25 – 1908.75
Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power
limits. RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.12dBi for part 22H and
6.12dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. This
device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed.
End-users and OEM integrators must be provided with specific information required to satisfy RF exposure
compliance.

Industry Canada

Certification Number/No. de Certification
Type of Radio Equipment/Type de Matériel
Model/Modele
Specification/ Issue/
Cahier des Édition
Charges
RSS132 2.0
RSS133 5.0
13
RI7CE910-DUAL
PCS Licensed Transmitter
Dual Band CDMA
Single Modular
0.292
0.278
From To
Frequency/ Frequency/
De Fréquences Á
Fréquences
824.7 M 848.31 M
1.851 G 1.909 G
2.5 PM
2.5 PM
5131A-CE910DUAL
Cellular Mobile New Technologies (824-849 MHz); Modular
Approval PCS Mobile (1850-1910 MHz)
CE910-DUAL
Emission
Designation/
Designation
D'émission
1M28F9W
1M28F9W
Emission Designators
1M28F9W
1M28F9W
Minimum Power Maximum
Power
292 mW 292 mW
278 mW 278 mW
SocketModem CDMA MTSMC-C2 Device Guide