Safety Instructions For The Hot Air Blower; Safety Information For Solid Fuel Lighters; Additional Safety Instructions - Parkside PLHLG 2000 A1 Original Instructions Manual

To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person .
NOTE
Spare parts not listed (such as
►
switches and replacement nozzles)
can be ordered via our call centre .
Safety instructions for the hot
air blower
CAUTION!
► This tool must be placed on its stand when
not in use .
Careless use of the appliance can
■
cause a fire .
Take care when using the appliance
■
near flammable materials .
Do not aim at the same place for
■
a prolonged period of time .
Do not use in the presence of an
■
explosive atmosphere .
■ 14 │ GB │ IE
Heat can be transferred to combus-
■
tible materials which are hidden
from view .
Replace on stand after use and allow
■
to cool before putting it away .
Do not leave the appliance unat-
■
tended while it is in operation .
Safety information for solid
fuel lighters
Check that the solid fuel lighter is
■
in the correct position .
Disconnect from the mains before
■
removing from fire .
Allow the solid fuel lighter to cool
■
down before packing it away .
Do not allow the power cable or
■
other flammable materials to come
into contact with hot components of
the solid fuel lighter .

Additional safety instructions

CAUTION! Avoid the risk of injury
or fire as well as health risks:
In case of danger, remove the mains
■
plug from the socket immediately .
CAUTION!
RISK OF INJURY!
Never use the appliance as a
►
hairdryer .
Never aim the hot air stream at
■
people or animals .
Never look directly into the nozzle
■
opening at the outlet .
PLHLG 2000 A1