Paper Jams In The Saddle Stitch Unit - Fuji Xerox Versant 3100 Press Optional Units Manual

(2) Open and close the cover of the Finisher.
3.
Close the cover.
4.
Check the curl direction of jammed paper, and correct paper curl.
Refer
For information about the Curl Correction, refer to "2.2 Curl Correction" (p.19).
7.5.2

Paper Jams in the Saddle Stitch Unit

Follow the steps below to clear paper jams in the Saddle Stitch Unit.
1.
Open the cover of the Finisher.
2.
Remove jammed papers.

When Lamp E7 is Lit...........................................................................................................................................................p.82

When Lamp E8 is Lit...........................................................................................................................................................p.82

When Lamp E9 is Lit...........................................................................................................................................................p.83
Note Solutions differ depending on where the paper jam occurs. Confirm the jammed area in the Error
Message area.
The code (E) on the upper-left part of the message indicates which error lamp on the top of the
machine is illuminating.
Chapter 7 Finisher
81