Fuji Xerox Versant 3100 Press Optional Units Manual page 78

1.
Open the cover of the Finisher.
2.
Remove jammed papers.

When Lamp E1 is Lit...........................................................................................................................................................p.78

When Lamp E2 is Lit...........................................................................................................................................................p.79

When Lamp E3 is Lit...........................................................................................................................................................p.79

When Lamp E4 is Lit...........................................................................................................................................................p.80

When Lamp E5 is Lit...........................................................................................................................................................p.80

When Lamp E6 is Lit...........................................................................................................................................................p.80
Note
Solutions differ depending on where the paper jam occurs. Confirm the jammed area in the Error
Message area.
The code (E) on the upper-left part of the message indicates which error lamp on the top of the
machine is illuminating.
Refer If the jammed long paper is lying across more than one unit, refer to "3.3.4 Long Paper Jam" in the
Printer Unit Manual.
When Lamp E1 is Lit
(1) Open lever "1a" to the left (
2
papers (
Note
Grasp the leading edge of the jammed sheet, and pull
out the sheet to remove it.
(2) If you have difficulty in removing jammed papers,
turn knob "1b" clockwise (
2
papers (
1
) and remove jammed
).
1
) and remove jammed
).
2
1
2
1