Table of Contents
Advertisement
Installation and operation
Water boiling
1. Turn the drain tap lever to the right, to close the drain tap.
2. Now, use the container to fill the water tank with the necessary amount of fresh
potable water (up to 'MAX' indication only).
CAUTION!
Risk of scalding!
Overfilling may lead to hot water leaks and scalding!
Observe the maximum filling capacity!
NOTE!
To reduce heating time and save energy, the tank may be filled with hot
water.
3. Place the steaming insert and the lid firmly on the water tank.
4. Boil water while observing the following instructions:
The blue indicator light (d) will be lit and goes off only when the rocker switch (b) is
switched to the 'O' position.
191004
5. Press the boiling function switch (a) to
'I' position (downwards), to start the
boiling process.
The red heating indicator light (c) will be lit
and will remain on during the entire heating
phase.
It takes approximately 10–12 minutes to
boil water filled up to maximum level. Then
the appliance switches off automatically,
and the red heating indicator light (c) goes
off.
After boiling, the water may be kept warm
thanks to the keeping warm function.
6. Switch the keeping warm rocker switch
(b) to 'I' position.
EN
13 / 22
Advertisement
Table of Contents
