Save And Exit - Avalue Technology EMX-BYT2 User Manual

Item
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Fast Boot
Boot Option #1/2
3.6.6

Save and exit

Item
Expert mode
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Launch EFI Shell from
filesystem device
Option
1~ 65535
On[Default]
Off
Disabled[Default]
Enabled
Disabled[Default]
Enabled
Set the system boot order.
Option
DQV mode[Default]
Expert mode
Reset the system after saving the changes.
Any changes made to BIOS settings during this session of the BIOS
setup program are discarded. The setup program then exits and
reboots the controller.
This option restores all BIOS settings to the factory default. This option
is useful if the controller exhibits unpredictable behavior due to an
incorrect or inappropriate BIOS setting.
Attempts to Launch EFI Shell application (Shellx64.efi) from one of the
available filesystem devices.
User's Manual
Description
Number of seconds to wait for setup
activation key. 65535(0xFFFF) means
indefinite waiting.
Select the Keyboard NumLock state
Enables or disables Quiet Boot option
Enables or disables boot with
initialization of a minimal set of devices
required to launch active boot option.
Has no effect for BBS boot options.
Description
Switch Expert mode or DQV mode.
EMX-BYT2 User's Manual 115