Address Space - Siemens SIMATIC ET 200SP Manual

Parameters/address space

4.3 Address space

4.3 Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image output/input.
Configuration options of DQ 8x24VDC/0.5A HF
You can configure the module with STEP 7 (TIA Portal) or with a GSD file. If you configure
the module by means of a GSD file, the configurations are available under various short
designations/module names; see the table below. The following configurations are possible:
Table 4- 2 Configuration options with GSD file
Configuration
1 x 8-channel without value
status
1 x 8-channel without value
status
1 x 8-channel with value sta-
tus
1 x 8-channel without value
status
1 x 8-channel with value sta-
tus
1 x 8-channel with value sta-
tus for module-internal
Shared Output with up to 4
submodules
1 x 8-channel without value
status
1 x 8-channel with value sta-
tus
1 x 8-channel with value sta-
tus for module-internal
Shared Output with up to 4
submodules
2 x 4-channel without value
status
2 x 4-channel with value sta-
tus
4 x 2-channel without value
status
4 x 2-channel with value sta-
tus
20
Short designation/module
name in the GSD file
DQ 8x24VDC/0.5A HF
V1.0
DQ 8x24VDC/0.5A HF
V1.1
DQ 8x24VDC/0.5A HF V1.
1, QI
DQ 8x24VDC/0.5A HF
V1.2
DQ 8x24VDC/0.5A HF V1.
2, QI
DQ 8x24VDC/0.5A HF V1.
2, MSO
DQ 8x24VDC/0.5A HF
V2.0
DQ 8x24VDC/0.5A HF V2.
0, QI
DQ 8x24VDC/0.5A HF V2.
0, MSO
DQ 8x24VDC/0.5A HF
V2.0, S.2
DQ 8x24VDC/0.5A HF
V2.0, S.2 QI
DQ 8x24VDC/0.5A HF
V2.0, S.4
DQ 8x24VDC/0.5A HF
V2.0, S.4 QI
Configuration software, e.g. with STEP 7 (TIA Portal)
Integrated in the hardware
catalog STEP 7, as of V13,
SP1
X
X
X
X
X
X
---
---
---
---
---
---
---
Digital output module DQ 8x24VDC/0.5A HF (6ES7132-6BF00-0CA0)
GSD file GSD file
PROFINET IO PROFIBUS DP
X X
X X
X ---
X X
X ---
X ---
X X
X ---
X ---
X ---
X ---
X ---
X ---
Manual, 12/2017, A5E03576680-AE