Wiring; Wiring And Block Diagram - Siemens SIMATIC ET 200SP Manual

Digital module dq 8x24vdc/0.5a hf

Hide thumbs Also See for SIMATIC ET 200SP:

Table of Contents

Wiring

3.1

This section includes the block diagram of the DQ 8x24VDC/0.5A HF module with the

terminal assignments for a 1-wire, 2-wire and 3-wire connection.

You can use and combine the different wiring options for all channels.

You can find information on wiring the BaseUnit in the system manual Distributed I/O System

ET 200SP (http://support.automation.siemens.com/WW/view/en/58649293).

Note

• The load group of the module must begin with a light-colored BaseUnit. Keep this in mind

also during the configuration.

Note

Cross circuit at output

Be aware that voltage from a cross-circuit at the output can feed L+ to modules.

Digital output module DQ 8x24VDC/0.5A HF (6ES7132-6BF00-0CA0)

Manual, 12/2017, A5E03576680-AE

Table of Contents