Table of Contents
Advertisement
12
Attaching the Auxiliary Air Cylinder
1. Before attaching the cylinder, inspect the o-ring located
at the tip of the cylinder valve connector (Fig. 6).
2. Insert the cylinder into the retaining sleeve and align the
threaded valve outlet with the cylinder valve connector.
Screw the knurled nut onto the threaded valve outlet until
finger-tight (Fig. 7).
CAUTION: Failure to put the auxiliary air cylinder into the retaining sleeve may cause the cylinder valve
connector to separate from the manifold.
Odyssea (Export) Technical Manual
Check
O-ring
Fig. 6
Fig. 7
Advertisement
Table of Contents
