Furuno TZT12F Operator's Manual page 4

Points/boundaries
Points can be entered on the plotter display (radar and fish finder displays also) to mark important locations such as
a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the points list.
Also, boundaries can be set at the position desired (net position, area to avoid, etc.)
How to enter a point
Tap where to enter a point.
How to set a point as destination
On-screen point On-screen point
Tap a point or the location
to set as destination.
Points list Points list
Lists
Tap [Lists] on the
home screen.
How to set a boundary
Tap the position where to
set a boundary.
If a point was tapped.
Tap the point to set as the destination. Tap the point to set as the destination.
On-screen point
Destination point
Purple line
(with arrow): Indicates
course to go to the
destination.
Yellow line:
Shortest course from own
ship to the destination.
Sort the list by date, name, icon, color, range.
Notice Notice Notice Notice Notice
Note: [Find on Chart] puts the
selected point at the screen center.
Tap the shape to use for
the boundary.
4 4
The point is entered
on the screen.
Selected location
[Area]/[Line]: Tap neces-
sary points to complete
the boundary, referring to
"Route" on the next page.
[Circle]: Drag icons to
adjust the size and
position, and then tap
[End Boundary].