Adjusting The Refrigerator Shelves; Removing The Freezer Shelves; Adjusting The Meat Pan Temperature; Removing The Crisper, Meat Pan, Andcovers - Whirlpool EDl9VK Use And Care Manual

Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
To
remove glass shelves:
your refrigerator. Glass shelves are strong enough to
1. Tilt up at front.
hold bottles, milk and other heavy food items.
2. Lift up at back.
3. Pull shelf straight out.
Glass shelves are
heovy Be careful.
I
III1 I )"I
To replace:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing freezer shelves.. .
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
I-
Lltt the Front
99
Then the Back
III '
Adjusting meat pan temperature.. .
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator This helps keep the
meat pan colder than the rest
of the refrigerator.
Use Control to Adjust
Meat Pan Temperatures
Set the control to let more or
less cold air through.
Removing the crisper; meat pan and covers...
Removing:
1. Slide crisper and meat pan
2. Lift the front.
3.
Slide the rest of the way out.
4. Replace in reverse order
Removing covers:
straight out to stop.
l
Covers are held in place by two pegs at the back
and two notched tabs in front.
1. Press front tabs out of the way.
2. Lift cover front.
3.
Lift back off the pegs.
4. Replace in reverse order
Removing freezer bin.. .
Fcr proper air movement. keep the freezer bin in
place when the refrigerator is operating.
To remove the bln:
l
Slide out to the stop.
l
Lift the front to clear the stop.
l
Slide out the rest of the way.
To replace the bln:
a Place bin on the slides.
l
Make sure the stops clear
the front of the slides.
l
Slide bin in.
6