Configuration Software Ks2000; Ks2000 - Introduction; Fig. 12 Ks2000 Configuration Software - Beckhoff KL3222 Documentation

2 channel accurate input terminals for pt100 (rtd)

Hide thumbs Also See for KL3222:

Table of Contents

Configuration Software KS2000

4.1

The KS2000 configuration software permits configuration, commissioning and parameterization of bus

couplers, of the affiliated bus terminals and of Fieldbus Box Modules. The connection between bus coupler /

Fieldbus Box Module and the PC is established by means of the serial configuration cable or the fieldbus.

Fig. 12: KS2000 configuration software

Configuration

You can configure the Fieldbus stations with the Configuration Software KS2000 offline. That means, setting

up a terminal station with all settings on the couplers and terminals resp. the Fieldbus Box Modules can be

prepared before the commissioning phase. Later on, this configuration can be transferred to the terminal

station in the commissioning phase by means of a download. For documentation purposes, you are provided

with the breakdown of the terminal station, a parts list of modules used and a list of the parameters you have

modified. After an upload, existing fieldbus stations are at your disposal for further editing.

Parameterization

KS2000 offers simple access to the parameters of a fieldbus station: specific high-level dialogs are available

for all bus couplers, all intelligent bus terminals and Fieldbus Box modules with the aid of which settings can

be modified easily. Alternatively, you have full access to all internal registers of the bus couplers and

intelligent terminals. Refer to the register description for the meanings of the registers.

Version: 2.3.0

KL3222

Table of Contents

Table of Contents