Fig. 25 History Field; Fig. 26 Value Field - Display Of The Input Value; Fig. 27 Value Field For Entering The Output Values; Fig. 28 Setting The Display - Beckhoff KL4414 Documentation

KS2000 Configuration Software
The spectacles mark the data that are currently graphically displayed in the History field.
Fig. 25: History field
The current input value is displayed numerically in the Value field.
Fig. 26: Value field – display of the input value
Output values can be modified through direct input or by means of the fader control.
Fig. 27: Value field for entering the output values
Danger for persons, the environment or equipment
Note that changing output values (forcing them) can have a direct effect on your automa-
tion application. Only modify these output values if you are certain that the state of your
DANGER
equipment permits it, and that there will be no risk to people or to the machine!
After pressing the Settings button you can set the format of the numerical display to hexadecimal, decimal or
binary.
Fig. 28: Setting the display
32 Version: 3.0.0 KL4414, KL4418, KL4424, KL4428