Yale HOISTS SHAW-BOX YKA Operation & Service Manual page 57

4 Installation
07.2020
Arrangement of the mounting positions
Type
YKE/SKE
YKD/SKD
Observe the mounting position of the screws (2).
Fasten the "PLS" (1) switching unit on at the prescribed position with the bolted
connections, see figures above.
Tighten the bolted connections with the prescribed tightening torque (12 Nm).
Perform a functional test, see the Performing a functional test section
Reeving Drum length
2PS L2 + L3 + L4 + L5
4PS L2 + L3 + L4 + L5
2PS L2
2PS L3 + L4 + L5
4PS L2 + L3 + L4 + L5
Assembly position
2
1
2
3
1
57