Yale HOISTS SHAW-BOX YKA Operation & Service Manual page 53

4 Installation
07.2020
Type
YKA/SKA
YKB/SKB
Observe the mounting positions of the screws (2), see figure above.
Fasten the "PLS" (1) switching unit on at the prescribed position with the bolted
connections, see figures above.
Tighten the bolted connections with the prescribed tightening torque (12 Nm).
Perform a functional test, see the Performing a functional test section.
Reeving Assembly position
2PS
4PS
2PS
4PS
1
3
2
4
53