Yale HOISTS SHAW-BOX YKA Operation & Service Manual page 138

7 Inspection and maintenance
138
If necessary, assemble the stop (6) with bearing and spring washer (for tightening
torques see table).
Type Thread size
YKA/SKA−YKB/SKB M8×1
YKC/SKC M10×1
YKE/SKE M16×1
Install the grease pan again!
Observe the minimum distance f (≥ 0.79 in) between the rope guide ring (1) and
clamping plates (2) for the rope anchorage.
With wire rope hoist type YKE/SKE-2PS with drum lengths L4 – L5:
Assemble the rope guide ring lock (7).
Tightening torque
[lb ]
ft
f
15
30
118
07.2020