Dmx Personality Mode Selection - Acclaim Lighting Pixel Bar User Manual

DMX PERSONALITY MODE SELECTION

Pixel Bar 1' models have a choice of five personality modes, while 4' models offer six
personality modes. For a summary of how channels are allocated in all the model variants,
see Channel designations, from page 7.
Using an RDM (Remote Device Management) tool, you can quickly change between the
various DMX personality modes. Various third party DMX/RDM tools are available; we
recommend the Acclaim Lighting XMT-350 for this task.
TO CHANGE PERSONALITY MODES USING THE ACCLAIM LIGHTING XMT-350
1 Connect the XMT-350 to the DMX input line of either a single fixture or multiple fixtures in
a pre-arranged daisy chain configuration.
2 Power on the fixture(s) and the XMT-350.
3 On the XMT-350, press the
function and press the
after a short while the XMT-350 will display a list of all located fixtures:
The fixture that is highlighted within the list should begin flashing its emitters to identify
itself.
4 If necessary, use the up/down buttons to highlight an alternative fixture.
5 On the XMT-350, press the
the down button to highlight the
6 Press the button to view the personality options:
7 Use the up/down buttons to highlight the required personality and then press the
button to store it within the fixture.
8 Press the button to return to the previous screen.
16
MODE button, then use the arrow buttons to highlight the
button to select. The XMT-350 will search for RDM devices and
button to view details for the chosen fixture and then use
DMX PERSONALITY entry:
www.acclaimlighting.com
RDM