Setting The Cell Mode (Personality) - Acclaim Lighting Linear XTR User Manual

Table of Contents

SETTING THE CELL MODE (PERSONALITY)

The 4' (1220mm) models offer a choice of modes that determine whether all of the emitters

act as a single 4' cell or as four separate 1' cells, each with their own set of DMX addresses -

see page 18.

TO SET THE CELL MODE USING THE XMT-350

1 Connect the XMT-350 to the DMX input line of the Linear XTR installation.

2 On the XMT-350, press the

RDM

function and press the

and after a short while the XMT-350 will display a list of all located fixtures. The fixture

highlighted in the list will flash its emitters to identify itself.

3 If necessary, use the up/down buttons to highlight an alternative fixture.

4 Press the

button to view details for the chosen fixture and then use the down button

to highlight the

DMX PERSONALITY

5 Press the

button to view the options:

6 Highlight the required cell mode:

• For white models, choose either

• For dynamic white models, choose either

• For RGBW or RGBA models, choose either

7 Press the

button to fix the highlighted choice.

8 Press the

button to return to the previous screen.

MODE

button, then use the arrow buttons to highlight the

button to select. The XMT-350 will search for RDM devices

entry:

1 GROUP WHITE

www.acclaimlighting.com

4 GROUP WHITE

1 GROUP DW

4 GROUP DW

1 GROUP RGBW

4 GROUP RGBW

Table of Contents