Omron NA Series Practices Manual page 46

To use these functionalities, implement the settings described below.
 Events and Actions Settings for Previous Screen
Set the action ShowPage to the events for both EtherNet_IP_NetworkMonitor and
DLR_Monitor. Then enter the page name in which the IAG IOStatus_Monitor is placed.
Event
SelectILMMaster
 IAG Property Assignment (Previous Screen)
Assign the following variables to the properties (Input/Output) for
EtherNet_IP_NetworkMonitor and DLR_Monitor.
Property (Input/Output)
SelectDeviceIPAddress
CurrentPageName
 IAG (IOStatus_Monitor) Property Assignment (Destination Screen)
Assign the following variables to the properties (Input/Output).
Property (Input/Output)
SelectDeviceIPAddress
PreviousPageName
 IAG (EIPStatus_Monitor) Property Assignment (Destination Screen)
Assign the variables to the following properties (Input/Output).
Property (Input/Output)
SelectDeviceIPAddress
PreviousPageName
LogPort1FCSErrorCount
LogPort1FCSErrorTime
LogPort2FCSErrorCount
LogPort2FCSErrorTime
46
Description
Executed when the IO-Link master unit is selected.
Description
IP address of the device to be displayed
Page name of this IAG
Description
IP address of the device to be displayed
Name of the page displayed after this
page is closed
Description
IP address of the device to be displayed
Name of the page displayed after this
page is closed
Variable to log the FCS error frequency
Variable to log the FCS error frequency
Variable to log the FCS error frequency
Variable to log the FCS error frequency
Enter the name of
the page where the
IAG
IOStatus_Monitor is
placed.
Variable
SelectDeviceIPAddress
PreviousPageName
Variable
SelectDeviceIPAddress
PreviousPageName
Variable
SelectDeviceIPAddress
PreviousPageName
LogPort1FCSErrorCount
LogPort1FCSErrorTime
LogPort2FCSErrorCount
LogPort2FCSErrorTime
Data Type
String
String
Data Type
String
String
Data Type
String
String
UShort(49)
Date(49)
UShort(49)
Date(49)