Omron NA Series Practices Manual page 27

For this screen design, implement the settings described below.
 Events and Actions Settings for Previous Screen
Set the action ShowPage for the event SelectILMMaster of the IAGs,
EtherNet_IP_NetworkMonitor and DLR_Monitor. Then enter the page name in which this IAG
is placed.
Event
SelectILMMaster
 IAG Property Assignment (Previous Screen)
Assign the following properties (Input/Output) for the EtherNet_IP_NetworkMonitor IAG to the
same variable.
Property (Input/Output)
SelectDeviceIPAddress
CurrentPageName
 Property Assignment
Assign the variables to the following properties.
Property (Input/Output)
SelectDeviceIPAddress
PreviousPageName
Now the IP address information and the destination page are shared among screens.
 Screen Settings
Place the Return button on the page containing this IAG. Then set the action ShowPage for
the button event Release. Next, enter the name of the previous page in which the IAG
EtherNet_IP_NetworkMonitor is placed.
Additional Information
The type of button is not specified.
Description
Executed when the IO-Link master unit is selected.
Description
IP address of the device to be displayed
Page name of this IAG
Description
IP address of the device to be displayed
Name of the page displayed after this
page is closed
Enter the name of
the page where this
IAG is placed.
Variable Variable Data Type
SelectDeviceAddress String
PreviousPageName String
Variable Variable Data Type
SelectDeviceAddress String
PreviousPageName String
Enter the name of the
page where the IAG
EtherNet_IP_Network
Monitor is placed.
27