Omron NA Series Practices Manual page 26

5-2-2 Installation to Screen
This IAG is intended to be used as the following:

When the button for NXR- ILM Unit, which is displayed by the IAG
EtherNet_IP_Network Monitor or DLR_Monitor located on the screen, is pressed, the
currently displayed screen switches to the screen with this IAG and the IAG accesses
to the Unit to receive the necessary information to display.

Pressing the Return button placed in the page containing this IAG works as the trigger
to back to the originally displayed screen.
Note: The simplest screen design, a single page is linked with a single destination page, is
described in this section.
■Related Screen (previous screen 1)
■Related Screen (previous screen 2)
26
Switches to the page where the IAG
EtherNet_IP_NetworkMonior
placed.
SelectDeviceIPAddress
CurrentPageName
When the NXR- ILM Unit is selected and its button
is pressed in the EtherNet_IP_NetworkMonitor
IAG or the DLR_Monitor IAG, the screen switches
to the page where this IAG is placed.
SelectDeviceIPAddress
CurrentPageName
Non-retentive variable area
SelectDeviceIPAddress
PreviousPageName
When the NXR- ILM Unit is selected and its button is
pressed in the EtherNet_IP_NetworkMonitor IAG
or the DLR_Monitor IAG, the selected IP address
information and the previously displayed screen
name are acquired.
is
■Screen with IAG
return
SelectDeviceIPAddress
PreviousPageName