Tubeless Tyres - Ducati Diavel Carbon Owner's Manual

Diavel abs; diavel carbon abs
Hide thumbs Also See for Diavel Carbon:
Table of Contents

Advertisement

Tubeless tyres

Front tyre pressure:
2.50 bar (rider only) - 2.6 bar (with passenger and/or
bags)
Rear tyre pressure:
2.50 bar (rider only) - 2.6 bar (with passenger and/or
bags)
As tyre pressures are affected by changes in
temperature and altitude; check and adjust them
whenever you are riding in areas where there are
large variations in temperature or altitude.
Important
Check and set tyre pressure when tyres are
cold.
To prevent distortion of the front wheel rim, increase
tyre pressure by 0.2 ÷ 0.3 bar when riding on bumpy
roads.
Tyre repair or change (Tubeless tyres)
In the event of a tiny puncture, tubeless tyres will
take a long time to deflate, as they tend to keep air
inside. If you find low pressure on one tyre, check the
tyre for punctures.
Warning
Punctured tyres must be replaced.
Replace tyres with recommended standard tyres
only.
Be sure to tighten the valve caps securely to avoid
leaks when riding. Never fit tyres with inner tubes, as
these can cause the tyre to burst suddenly, with
possibly serious consequences for the rider and
passenger.
After replacing a tyre, the wheel must be balanced.
Important
Do not remove or shift the wheel balancing
weights.
Note
Have the tyres replaced at a Ducati Dealer or
authorised Service Centre. Correct removal and
installation of the wheels is essential.
Some parts of the ABS (such as sensors and phonic
wheels) are mounted to the wheels and require
specific adjustment.
185

Advertisement

Table of Contents
loading

Table of Contents