Steel/featherlite collegiate net system (10 pages)
Summary of Contents for Jaypro Sports 400-AC-FG
Page 1
FIXED HEIGHT BASKETBALL SYSTEM 400-AC-FG Item # 400-FA-FG ASSEMBLING INSTRUCTIONS AND OWNER'S MANUAL WARNING F A I L U R E T O C O M P L Y W I T H A N Y O F T H E W A R N I N G S I N T H E S E I N S T R U C T I O N S M A Y R E S U L T I N S E R I O U S P E R S O N A L I N J U R Y .
Page 2
TOOLS AND MATERIALS REQUIRED FOR ASSEMBLY (Not Included) 1. 2 Adjustable Wrenches 10. Concrete-1/2 yard or 14-16 2. Socket Set Bags, (80 lb. bags) 3. 9/16" Wrench 11. Phillips Head Screwdriver 4. 3/4" Wrench 12. Electric Drill 5. 15/16" Wrench 13.
Page 3
Required For This Page: Shovel, Concrete, Rebar and Tape Measure **ONLY MINIMUM OF TWO ADULT IS REQUIRED FOR THE FOLLOWING STEPS** STEP A NOTE: Before digging, call to locate any buried utility lines. 24” a. Dig a hole 54" deep and 36"x 36" square. The edge of the hole should be flush with the edge of the playing surface.
Page 4
Required For This Page: • HEX HEAD BOLT APPROXIMATELY 6” - 7” LONG WITH WASHERS, LOCK WASHERS AND HEX NUT. (SET OF 6) • BACK POST PLATE • EXTENSION ARM WELDMENT • HEX HEAD BOLT APPROXIMATELY 3” LONG WITH WASHERS, LOCK WASHERS AND TWO HEX NUT. (SET OF 4) WARNING *BECAUSE OF THE SIZE AND WEIGHT OF THE SYSTEM, A MINIMUM OF THREE ADULTS ARE REQUIRED FOR THE FOLLOWING STEPS*...
Page 6
Required For This Page: (Optional For Rectangular Backboard) • HEX HEAD BOLT APPROXIMATELY 6” LONG WITH WASHERS, LOCK WASHERS AND HEX NUT. (SET OF 1) • SUPPORT ARMS (SET OF 2) • HEX HEAD BOLT APPROXIMATELY 3” LONG WITH TWO WASHERS, BLACK FENDER WASHER AND LOCK NUT.
Page 7
Required For This Page: (Optional For Rectangular Backboard) • SELF-DRILLING HEX HEAD W/ PLASTIC WASHERS QTY: 10 • PLASTIC CAPS QTY: 10 • SAFETY PADS (OPTIONAL) Electric Drill STEP 4 (Optional For Rectangular Backboard) Position the backboard pad to the backboard. Use drill to secure the self-drilling hex head w/ plastic washers on the backboard frame.
Need help?
Do you have a question about the 400-AC-FG and is the answer not in the manual?
Questions and answers