Cleaning The Condenser - 3DHISTECH Pannoramic 1000 User Manual

Pannoramic 1000 1.2 – User's Guide

6.1.2 Cleaning the condenser

Before cleaning, switch off the device and pull the power cord out of the
connector.
1. Open service door.
2. Gently move the slide holder (2) into the middle above the condenser (1).
3. Do not let liquid penetrate into the system.
4. Use compressed air to lay the dust.
To clean the glass surface of the condenser from any other contamination, it is recommended
to apply Isopropanol on a piece of lint-free cotton cloth and gently clean the surface.
March 19, 2019 – Rev. 2
Warning!
Figure 25 – Condenser unit
3DHISTECH Ltd.
6.1.2 Cleaning the condenser
49(78)