3DHISTECH Pannoramic 1000 User Manual page 36

Pannoramic 1000 1.2 – User's Guide
Magazine View operation buttons
– Select/Deselect all
– Go to Slide View
– Restore modified slide attributes (name/profile) to default.
– Batch preview – slides that have been scanned for preview are represented with active slide
icons on the list.
– Remove slide(s) from list
– Add slide(s) to list
NOTE: To select multiple slides, use CTRL or SHIFT keys during selection.
If a scanning progress of a magazine has been initiated, the surface becomes inactive therefore it
cannot be modified, but the scanning process can be stopped by clicking
Progress bar that can be expanded and is scrollable, lists detailed process and scanning progress
information.
V. Set scanning parameters
In Slide View the selected profiles can be parameterized and saved as well if needed.
If a profile parameter has been modified, the modification can be applied to the profile by saving.
Click to save profile as general profile, or click
temporary profile is available for you to select from the Temporary Profiles list.
Change profile color by clicking the color field at the left of the profile name.
March 19, 2019 - Rev. 2
Figure 16 – Progress panel
to save as a temporary profile. The resulting
3DHISTECH Ltd.
4 Software and Work-flow
.
36(78)