Software And Work-Flow - 3DHISTECH Pannoramic 1000 User Manual

Pannoramic 1000 1.2 – User's Guide

4 Software and Work-flow

I. Launch control software
Run scanner software by double-clicking the
window is opened.
The LED color of the door opener button indicates the actual status of the device:
green if no process is running or has just been completed, thus the door can be opened for
•
magazine loading or maintenance
violet if the device is in standby mode – press the door open button to move gripper arm to
•
home position
if the LED is lit in yellow, press the button twice to finish the actual process and the door can
•
be opened after the LED turns green
None of the motors can be actuated while the door is opened since
their circuit breakers are tripped, therefore magazine loading and
removal is entirely safe.
March 19, 2019 - Rev. 2
Figure 10 – Home View
Note:
3DHISTECH Ltd.
4 Software and Work-flow
icon on the desktop, and the Home View
30(78)