Auxiliary Rs232 Interface - Datalogic Matrix 300N Product Reference Manual

CBX Electrical Connections

Auxiliary RS232 Interface

The RS232 auxiliary interface is available for Point-to-Point connections. When it
is connected to the host computer it allows transmission of code data.
The parameters relative to the aux interface (baud rate, data bits, etc.) can be
defined through the Reading Phase step (Channels) in DL.CODE.
The 9-pin female Auxiliary Interface connector inside the CBX is the preferred
connector for temporary communication monitoring.
If permanent system wiring is required, the following pins are used to connect
the RS232 auxiliary interface:
Do not connect the Aux Interface to the CBX spring clamp connectors and the 9-pin
connector simultaneously.
NOTE
72
Figure 45 - 9-pin female connector
CBX100/500
TX
RX
SGND
Figure 46 - RS232 Auxiliary Interface Connections
1
5
9 6
Description
Auxiliary Interface Transmit Data
Auxiliary Interface Receive Data
Auxiliary Interface Reference
User Interface
RX TX
Reference
Matrix 300N