8 8 P.
8 P.
Control Panel
Pre-set program
Icons
Pulse
button
On/OFF
Button
How to Use
Check that the electrical rating shown on the rating plate corresponds with
your household electricity supply.
Stand-by Mode and Energy Saving Mode
Plug in the blender and set the blender jug on the base unit. The power
light and indicator lamp will light up in red; the blender is now in Stand-
By Mode.
If the blender is left idle for 3 minutes the blender will go into Energy
Saving Mode; the power light will remain lit with a red light, while the
indicator lamp will go out. (From Energy Saving Mode, the unit will go
into Stand-By Mode when any key is pressed)
On/OFF Button
This button is the ON/OFF key for the pre-set programs. A selected pre-
set program function will only be activated by pressing the
Pressing the
Indicator lamp
button again will stop the unit.
Speed dial
Power light
button.