Replacing The Ink And Chip Unit; About Ink And Chip Unit Replacement - Epson SureColor F6370 User Manual

5. Close the ink inlet cover.
Parent topic:
Related references
Maintenance Precautions

Replacing the Ink and Chip Unit

See these sections to replace the ink chip unit in your product.

About Ink and Chip Unit Replacement

Ink and Chip Unit Precautions
Replacing the Chip Unit and Refilling Ink
Parent topic:
About Ink and Chip Unit Replacement
When the message Check Ink Levels is displayed on the control panel screen, you need to refill the ink
and replace the chip unit soon. Obtain an ink pack of the appropriate color as soon as possible.
You will be unable to print if a chip unit needs to be replaced. If the Check Ink Levels message is
displayed during a print job, the print job pauses while you refill the ink and replace the chip unit. You can
use the same procedure to refill the ink and replace chip units for all colors.
Note: When the message Refill Ink Tank is displayed on the control panel screen and the remaining ink
level is above the top edge of the metal plate or greater than 1.9 in. (50 mm) from the base of the ink
Maintenance
Maintenance
68