Viewing And Changing Media Settings - Epson SureColor F6370 User Manual

Related tasks

Viewing and Changing Media Settings

Viewing and Changing Media Settings
After you load media in your product, you see a screen like this on your product control panel which lets
you view or change your media settings:
The media settings include the options selected and stored for each media bank or RIP setting you
created.
1. Do one of the following:
• If the displayed media settings are correct for the media you loaded, press the up or down arrow
button to select Keep Settings Above and press the OK button.
• If you need to change the media settings, press the up or down arrow button to select Change
Settings and press the OK button.
2. If you want your product to calculate the amount of media remaining based on the length of the roll
and the amount already printed, and display the approximate results on the product control panel,
set the Remaining Setup setting to On.
3. To change your media settings, select the setting you want to change and press the OK button.
Then press the
4. When you finish changing media settings, press the up or down arrow button to select Exit and
press the OK button.
back button and repeat this step to select additional settings as necessary.
29