Setting
Roll Paper Setup
Options
Description
Auto Cut
Automatically cuts the roll paper as each page
is printed.
Refresh Margin
Automatically trims the leading edge to
remove any ink stains that may have been left
from the previous print job.
Page Line
Prints a cut line between pages if Auto Cut is
off.
Roll Paper Margin
Sets the margins for each page.
Note: Settings made using the RIP software
take priority over these settings.
Side: 3mm (0.12 in.) or 15mm (0.59 in.)
Top: 5mm (0.2 in.) or 15mm (0.59 in.)
Bottom: 5mm (0.2 in.), 15mm (0.59 in.), or
150mm (5.9 in.)
Roll Paper Remaining
Displays and records the amount of paper
remaining on a roll (after you enter the total roll
length).
Remaining Alert
Enter the length at which the printer will alert
you, from 4 to 50 ft (1 to 15 m).
56