Epson SureColor F6370 User Manual page 99

2. Put the inner seal and cap on the used waste ink bottle.
3. Insert the waste ink tube into the new waste ink bottle and place the bottle in the holder.
Note: Be sure the waste ink tube is inserted in the waste ink bottle or waste ink could spill onto your
product.
4. Lower the stopper onto the waste ink bottle and make sure it firmly seals to the mouth of the bottle.
Note: If the stopper does not firmly seal, waste ink could spill onto your product.
5. Press the OK button on the product control panel.
6. Press the OK button again to reset the waste ink counter.
Caution: Waste ink is classified as industrial waste. Dispose of waste ink according to your local
laws and regulations, such as entrusting it to an industrial waste disposal company. When handing
over the waste ink to the industrial waste disposal company, make sure you include the Safety Data
Sheet (SDS) found on the Epson support website.
Note: If you replaced the waste ink bottle before the replacement message appeared on the control
panel, press the OK or Menu button while on the
waste ink counter.
tab and select Waste Ink Counter to clear the
99