Page 1
Operator´s manual Snow Blower Park Ranger 2150...
Page 2
Introduction Dear Customer Congratulations with your Egholm product. The Park Ranger 2150 is a Danish designed and manufactured product, which offers a very flexible way of maintaining outdoor areas. Optimal use of your Park Ranger 2150 snow blower To ensure optimal performance of your Park Ranger 2150 snow blower, please read this manual carefully before using the machine.
The snow blower is very powerful and can throw the lifetime of both the machine and the snow high up over hedges or other obstacles – attachment. far away from cyclists and pedestrians. Operator’s Manual Park Ranger 2150 Snow Blower...
(Pictures 2 - 4) Make sure that no one puts their hands or Keep away from the auger any objects into the discharge chute when the snow blower is running, to avoid injuries. (Picture 2) Operator’s Manual Park Ranger 2150 Snow Blower...
Page 6
Use approved hearing protectors Avoid damage to your hearing: Use approved hearing protectors while the machine is in use. (Picture 2) Operator’s Manual Park Ranger 2150 Snow Blower...
· has been manufactured in conformity with the provisions of the Machinery Directive, Directive 2006/42/EU The Park Ranger 2150 fitted with the FH 2100 cab (ROPS approved) · has been tested at the Danish Institute of Agricultural Sciences at Bygholm in conformity with directive 86/298/EEC concerning rear mounted, roll-over protection structures of narrow-track wheeled agricultural and forestry tractors.
Technical data: Type description SN100 Clearing width 1,000 mm Intake height 600 mm Ground clearance below snow blower 420 mm Weight of snow blower 105 kg N.B! Specifications may be changed without prior notice. Operator’s Manual Park Ranger 2150 Snow Blowerr...
(Picture 4) Disassembly D-connectors Follow the procedure for fitting in reverse order. Put the protective caps on the snap couplings to protect them from dirt. The hoses are fastened with a rubber strap Operator’s Manual Park Ranger 2150 Snow Blower...
The working area must be inspected carefully before snow clearing is started, foreign elements can be very dangerous if Lever A Lever B they are discharged with the snow. Right side Lever D Operator’s Manual Park Ranger 2150 Snow Blower...
1. Unscrew the nuts and bolts which hold the skid shoe. 2. Reattach the skid shoe at the required height. Adjust the skid shoes on the opposite side in the same way. Operator’s Manual Park Ranger 2150 Snow Blowerr...
Page 14
4. Push a new bolt through the auger and put on the nut. These safety bolts must be original bolts, which can be ordered from an authorised Egholm distributor. Egholm item no. E03200430 and E03803060 Operator’s Manual Park Ranger 2150 Snow Blower...
6. Reconnect the hydraulic hoses. Stop the machine before working on the snow blower: No form of service whatsoever may to push out the snow be carried out on the snow blower while the machine is running. Operator’s Manual Park Ranger 2150 Snow Blower...
The warranty period for the materials and manufacture of this snow blower is 12 months from the date of purchase. In case of errors or defects on the machine within the warranty period, Egholm will carry out the necessary repairs at no charge to the customer, including materials and working hours, in accordance with the terms and conditions listed below.
2. Remove the plastic and rubber parts and dispose of them in accordance with the applicable environmental legislation. 3. After the aforementioned parts have been removed, the machine is ready to be handed over to a local approved scrap merchants. Operator’s Manual Park Ranger 2150 Snow Blower...
Need help?
Do you have a question about the Park Ranger 2150 and is the answer not in the manual?
Questions and answers