Temporary Ringer Silencing; Volume Control; Mute - VTech VH6221 Abridged User Manual

Setting
Sound settings

Temporary ringer silencing

Press MUTE on the ringing headset to temporarily silence the ringer
in the headset earpiece without disconnecting the call. The next
incoming call rings normally at the preset volume.

Volume control

To adjust the listening volume during a call:
• Press + or - to adjust the listening volume of that headset.
To adjust the speaking volume during a call:
• Press /VOLUME/ on the right side of the headset base to adjust
the speaking volume for all registered headsets.
Prolonged exposure to high volume levels using the headset may damage your
hearing.

Mute

The mute function turns off the microphone. You can hear the caller,
but the caller cannot hear you.
To mute a call:
• Press MUTE on the headset to
turn off the microphone.
You hear the voice prompt "Mute on". The MUTE light on the headset
base flashes and a short beep plays every 30 seconds.
To take a call off mute:
• Press MUTE on the headset to resume the conversation.
You hear the voice prompt "Mute off".
16