VTech VH6221 Abridged User Manual page 10

12
Overview
Headset base
AutoAns ON/OFF
13 –
• When turned on, your headset will then automatically answer a call when it is
lifted from the charging cradle.
WB (Wideband) / NB (Narrowband) Switch
14 –
• Use this switch to adjust the audio bandwidth. Wideband audio delivers wider
frequency response and higher HD audio quality.
Audio Adjustment Switch
15 –
• When you have connected the headset base to a deskphone, use this switch to
adjust the headset earpiece audio between A and F, until the dial tone is clear.
Notes
• The default setting of the Audio Adjustment Switch is A.
• The audio adjustment setting is dependent on
- the types of deskphones to which the headset base is connected; and
- the interference caused by other DECT systems operating in the same
environment.
3
9
13
14
15