Connecting Ac Power, Single-Phase - Dell EMC VMAX3 Series Site Planning Manual

EMC-supplied power cable
and connector from the PDU
Zone B
AC input
cable B
15 ft. extension
cord options
Mating connector or
customer-supplied cable
Customer's PDU 1
l
Figure 35 Connecting AC power, single-phase
Rear view
System bay
Zone B PDU
(Left)
Cable connectors are shown
as they exit the bottom rear
of the bay.
P1 P2 P3
P2 and P3 used
depending on
configuration
For three-phase power: Connect customer-supplied PDU power cables to the Dell EMC
bay by connecting to the bay's AC input cables for power zone A and power zone B as
shown below.
™ ™
Dell EMC VMAX3 Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K
Zone A PDU
(Right)
EMC-supplied power cable
and connector from the PDU
Zone A
AC input
P1 P2 P3
cable A
15 ft. extension
cord options
Mating connector or
customer-supplied cable
Customer's PDU 2
Best Practices for AC Power Connections
93