Connecting Power To The Dae - Dell EMC Unity Series Installation Manual

Expansion port cable labeling details
Label part Label
number
046-004-467
046-004-467_xx
046-004-460
046-004-460_xx
046-004-468
046-004-468_xx

Connecting power to the DAE

Port
LCC B Port B
B BE4
B BE4
B BE4
B BE4
LCC A Port B
A BE5
A BE5
A BE5
A BE5
LCC B Port B
B BE5
B BE5
B BE5
B BE5
2. Connect the existing DAE to the expansion DAE to extend that back-end.
If you have additional DAEs, add labels to the mini-SAS HD to mini-SAS HD
cables and use those cables to extend the bus. For more information about
cabling additional DAEs, see the associated Hardware Information Guide .
a. Connect port B on the link control card A (LCC A) of the lower-numbered
DAE to port A on the link control card A (LCC A) of the higher-numbered
1
DAE. [ ]
LCC A is located on the lower portion of the DAE.
b. Connect port B on the link control card B (LCC B) of the lower-numbered
DAE to port A on the link control card B (LCC B) of the higher-numbered
2
DAE. [ ]
LCC B is located on the upper portion of the DAE.
Procedure
1. Verify that the cabinet circuit breakers are in the On position and that power is
connected to the cabinet.
2. Connect the power cables to the optional DAEs.
Cable and power up your DAE components
Primary port cable labeling details
Label part Label
number
046-004-467
046-004-467_xx
046-004-460
046-004-460_xx
046-004-468
046-004-468_xx
Connecting power to the DAE
Port
LCC B Port A
B BE4
B BE4
B BE4
B BE4
LCC A Port A
A BE5
A BE5
A BE5
A BE5
LCC B Port A
B BE5
B BE5
B BE5
B BE5
65