Logging And Status - ADDER AdderLink iPEPS User Manual

Logging and status

This screen provides various details about the user activity on the iPEPS.
Note: The log has a maximum capacity of 1000 event lines. After 1000 entries,
the oldest entries are overwritten. If log data are important to your installation,
ensure a regular backup procedure or use the Syslog Server IP Address option to
send log information automatically to another system.
Date and
time the
event
occurred
Click to clear Click to
all log entries refresh
the list
Type of event, user name and access
method or remote IP address
Optionally enter an Click to
IP address to which return to
the status log should the main
be sent menu
To copy and paste the log
You can copy the information listed within the log and paste it into another
application.
1 While viewing the log screen, press Ctrl and C, to copy the data into the
clipboard.
2 In a text application (i.e. Word, WordPad, Notepad) press Ctrl and V, or right
mouse click and 'Paste'.
Syslog Server IP Address
Logging information can optionally be sent, as it occurs, to a separate system
using the standard Syslog protocol. Enter the IP address of a suitable system in
the field provided.
For further details
• For details of the Syslog protocol (RFC number: 3164)
http://www.ietf.org/rfc.html
To get here
1 Using VNC viewer or a browser, log on as the 'admin' user.
2 Click the 'Configure' button in the top right corner.
3 Click the 'Logging and Status' option.