Clear Ip Access Control - ADDER AdderLink iPEPS User Manual

Clear IP access control

This option removes all entries from the IP access control feature within the
iPEPS.
What is IP access control?
The IP access control feature (configurable by a remote admin user) allows
certain network address ranges to be denied access to the iPEPS. If set
incorrectly, it is possible to exclude all network users and so this option provides
an emergency recovery point.
To clear IP access control
1 Use the local keyboard and log on as the 'admin' user.
2 Press (hotkeys may be set differently).
3 Select 'Configuration'.
4 Select 'Network
configuration'.
5 Highlight the 'Clear IP
access control' option
and press .
 

  
  
  
  

  
  
   
 
0