PR 9113 Series Safety Manual page 53

9113 TemperaTure / ma CONVerTer
Action
15 Verify CJC type and press OK
(ONLY IF SENSOR = TC and CH1.TYP = TEMP)
16 Verify fixed output range and press OK
17 Verify fixed output value on detected sensor error
and press OK
(ONLY IF CH1.TYP = TEMP, or IF I.RANGE = 4-20
mA)
18 Verify temperature for 0% output and press OK
(ONLY IF CH1.TYP = TEMP)
19 Verify temperature for 100% output and press OK
(ONLY IF CH1.TYP = TEMP)
20 Verify analogue output response time and press OK CH2.TYP
21 Verify input type for Channel 2 and press OK
22 Verify fixed input range and press OK
(ONLY IF CH2.TYP = CURR)
23 Verify sensor connection type and press OK
(ONLY IF SENSOR = Ni or Pt and CH2.TYP =
TEMP)
24 Verify temperature unit and press OK
(ONLY IF CH2.TYP = TEMP)
25 Verify temperature sensor type and press OK
( ONLY IF CH2.TYP = TEMP)
26 Verify Pt sensor type and press OK
(ONLY IF SENSOR = Pt and CH2.TYP = TEMP)
Version No. V6R0
Safety manual
Display shows
O.RANGE
OUT.ERR
OUT.LO
OUT.HI
RESP
I.RANGE
CONNEC
UNIT
SENSOR
Pt.TYPE
Ni.TYPE
15