Iecex Installation Drawing - PR 9113 Series Safety Manual

LERBAKKEN 10, 8410 RØNDE DENMARK
9113
For safe installation of 9113B the following must be observed. The module shall only be
installed by qualified personnel who are familiar with the national and international laws,
directives and standards that apply to this area.
Year of manufacture can be taken from the first two digits in the serial number.
4501
For Installation in Zone 2 the following must be observed.
The 4501 programming module is to be used solely with PRelectronics modules. It is important
that the module is undamaged and has not been altered or modified in any way. Only 4501
modules free of dust and moisture shall be installed.
IECEx Certificate: ............................................................KEM 09.0052 X
Marking
Standards
Hazardous area
Zone 0,1,2, 20, 21, 22
Revision date:
2012-07-04

IECEx Installation drawing

IEC60079-15:2005, IEC60079-11:2011, IEC60079-0:2011
IEC60079-26:2006
Non Hazardous area
or Zone 2
-20 ≤Ta ≤ +60ºC
44
43
42
41
54
53
52
51
91 92 93 94 95
Power
Rail
Version Revision:
V4 R0
9113 - Product Version 9113-004
[Ex ia Ga] IIC/IIB/IIA
Ex nA nC IIC T4 Gc
[Ex ia Da] IIIC
[Ex ia Ma] I
(terminal 11,12,13,14)
(terminal 31,32,33,34)
(terminal
91,92,93,94,95)
4501
U : 253 V, max 400 Hz
m
34
33
32
31
14
13
12
11
9113
Prepared by:
PB
9113QI01
Page:
1/3
27