Page 7
Assembly Instructions 2/4 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. Cam Lock Screw STEP 1 Put Cam Lock Screws into the...
Page 8
Assembly Instructions 3/4 Cam Lock Screw STEP 4 Put the Cam Lock Screw into the pre-drilled holes at Top (A). Cam Lock STEP 5 Turn the unit back to its normal position. Adjustable Pin Place Top (A) onto the unit, using Cam Locks. Insert Adjustable Pins into both side panels and middle panels at the desired level.
Page 9
Assembly Instructions 4/4 STEP 6 Insert Wood Screws from the back and tighten up. Wood Screw STEP 7 Place the Hutch unit onto the Buffet unit. To hold firmly the Hutch and Buffet, attach Steel Plate Connectors, Steel Plate insert Wood Screws and tighten up. Connector (See figure 1) Wood Screw...
Attention ! For safety reasons, we recommended you strictly follow this additional instructions as to prevent this Buffet & Hutch Unit from tipping over. HARDWARE LIST Plastic Belt 2 pcs.(+1 extra) Wall Screw (long) 2 pcs.(+1 extra) Wood Screw (short) Steel Bracket Anchor (A) Anchor (B)
Need help?
Do you have a question about the 88 5100 301 and is the answer not in the manual?
Questions and answers