Table of Contents
Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
B.
Side Panel
1 pc.
H.
Back Stretcher
2 pcs.
I.
Front Piece
1 pc.
J.
Front Piece
1 pc.
Carton 88 5180 691 is also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
88 5180 692
Buffet
D.
C.
Middle Panel
Side Panel
1 pc.
1 pc.
K.
Fixed Shelf
1 pc.
E.
F.
Back Panel
Middle Panel
3 pcs.
1 pc.
Q.
Door
1 pc.
S.
Drawer
2 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
888-680-7460, 877-831-0319
G.
Back Piece
2 pcs.
R.
Door
1 pc.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Home Styles 88 5180 692
Summary of Contents for Home Styles 88 5180 692
- Page 1 Refer to later page(s) of these 1 pc. instructions for drawer assembly. Carton 88 5180 691 is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/6 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/6 STEP 3 Cam Lock Head Cap Bolt Attach Front Piece (I) to unit. Attach Middle Panel (D) to unit with Head Cap Bolts. (See Figure 4) Attach Fixed Shelf (K) and Front Piece (J) to unit with Cam Locks. Attach Middle Panel (E) to unit with Cam Locks and Head Cap Bolts.
- Page 4 Assembly Instructions 4/6 Drawer (S) Bottom STEP 6 Attach Drawer Front (S1) and Drawer Back (S2) to Drawer Side (S3) with Wood Screws (long). Attach Drawer Side (S4) to unit with Wood Screws (long). Roller at back STEP 7 Slide Drawer Bottom (S5) into the grooves of Drawer Sides (S3) and (S4) until it meets Drawer Front (S1).
- Page 5 Assembly Instructions 5/6 STEP 9 Head Cap Bolt Attach Rack (M) to Top (A) with Head Cap Bolts. Head Cap Bolt STEP 10 Turn unit to its’ upright position. Attach Door Pull Handles to Doors (Q) and (R) with Machine Screws. (See Figure 5) Attach Doors (Q) and (R) to unit by sliding door lift hinges...
- Page 6 Assembly Instructions 6/6 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly. STEP 12 Anchor in wall Wall Screw Pre-drilled hole Bracket Place unit at desired location. on wall at top of unit 3/8”...
- Page 7 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 88 5180 692 and is the answer not in the manual?
Questions and answers