Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Home Styles Manuals
  4. Indoor Furnishing
  5. 88 5134 307
  6. Quick start manual

Home Styles 88 5134 307 Quick Start Manual

Hutch
Hide thumbs

Advertisement

Quick Links

Download this manual
88 5134 307
Hutch
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc
.
B.
Side Panel
1 pc
.
D.
Front Rail
1 pc.
E.
Back Stretcher
1 pc.
F.
Back Stretcher
1 pc.
Hardware List
Hex Wrench
Small Wrench
1 pc.
1 pc.
Tools required for assembly : Drill, 3/8" Drill Bit
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
C.
Side Panel
1 pc.
M6x15
M6x30
Head Cap Bolt (short)
Head Cap Bolt
4 pcs.(+1 extra)
26 pcs.(+1 extra)
G.
Shelf
1 pc.
H.
Divider
1 pc
.
I.
Back Panel
2 pcs.
K.
Shelf
2 pcs.
Adjustable Pin
8 pcs.(+1 extra)
J.
Back Panel
1 pc.
Steel Plate
2 pcs.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 88 5134 307 and is the answer not in the manual?

Questions and answers

Related Manuals for Home Styles 88 5134 307

Summary of Contents for Home Styles 88 5134 307

  • Page 1 Head Cap Bolt (short) Head Cap Bolt Adjustable Pin Steel Plate 1 pc. 1 pc. 4 pcs.(+1 extra) 26 pcs.(+1 extra) 8 pcs.(+1 extra) 2 pcs. Tools required for assembly : Drill, 3/8” Drill Bit Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
  • Page 2 Assembly Instructions 2/5 IMPORTANT *Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. *Do not tighten up all the Head Cap Bolts until each part is properly assembled. *Use a soft cloth between these parts and the floor.
  • Page 3 Assembly Instructions 3/5 STEP 3 Turn unit to its’ upright position. Attach Divider (G) to unit with Head Cap Bolts. Slide Back Panels (H) and (I) into position. STEP 4 Attach Back Stretcher (F) to unit with Head Cap Bolts. Insert Head Cap Bolts into the pre-drilled holes of back panels.
  • Page 4 Assembly Instructions 4/5 STEP 5 Attach Top (A) to unit with Head Cap Bolts. Insert Adjustable Pins into side panels at the desired level. Place Shelves (K) into position. Adjustable Pin Head Cap Bolt (short) STEP 6 Attach Hutch to Buffet with Steel Plates Steel Plate and Head Cap Bolts (short).

  • Page 5: Hardware List

    Assembly Instructions 5/5 Attention! Attention! To help reduce the risk of the unit tipping over, the Tipover Restraint To help reduce the risk of the unit tipping over, the Tipover Restraint must must be installed following be installed following these instructions exactly! these instructions exactly! Anchor in wall Anchor in wall...

  • Page 6: Part List

    Part List 1 pc. For assembly see instructions in carton 88 5134 611 Tools required for assembly : Phillips screwdriver, Drill, 3/8” Drill Bit, Level Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
  • Page 7 32 pcs.(+1 extra) 12 pcs.(+1 extra) 16 pcs.(+1 extra) 2 pcs. 2 pcs. Also need the parts in carton 88 5134 612 Tools required for assembly : Phillips screwdriver, Drill, 3/8” Drill Bit, Level Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
  • Page 8 Assembly Instructions 2/5 IMPORTANT *Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. *Do not tighten up all the screws until each part is properly assembled. *After assembly item must be level to work properly. Use the included adjustable levelers to level. *Use a soft cloth between these parts and the floor.
  • Page 9 Assembly Instructions 3/5 STEP 3 Turn unit to its’ upright position. Slide Back Panels (J) and (K) into position. STEP 4 Attach Back Stretcher (I) to unit with Head Cap Bolts. Insert Head Cap Bolts into the pre-drilled holes of back panels.
  • Page 10 Assembly Instructions 4/5 Wood Screw Machine Screw Adjustable Pin Figure 3 Figure 4 Figure 5 STEP 5 Attach Top (A) to unit with Head Cap Bolts. Insert Adjustable Pins into side panels and middle panels at the desired level. Place Shelves (L) into position. Attach Doors (M) and (N) to unit with Wood Screws.
  • Page 11 Assembly Instructions 5/5 Attention! Attention! To help reduce the risk of the unit tipping over, the Tipover Restraint To help reduce the risk of the unit tipping over, the Tipover Restraint must must be installed following be installed following these instructions exactly! these instructions exactly! Anchor in wall Anchor in wall...