Adjusting The Input Levels And Monitoring Balance - Zoom F4 Operation Manual

Adjusting the input levels and monitoring balance

You can adjust the input levels (TRIM) and monitoring levels (FADER) of each track.
1.
Open the mixer on the Home
Screen. (→ P .11)
2.
Press E.
3.
Use e to select the param-
eter you want to adjust, and
press E.
HINT
You can select TRIM or FADER.
4.
Use a for the track you
want to adjust to change the
parameter value.
The selected parameter value
changes in response to the oper-
a
ation of .
HINT
The position of the knob on the display always shows the
current setting.
NOTE
After changing the parameter be adjusted, for example, if the
a
positions of and the knob on the display are different,
a
moving will not affect that setting.
In this case, if you adjust
the knob on the display, the display knob and
relinked, and you will be able to use it to adjust the setting
value again.
Parameter Setting range
Input connected using XLR plug
(Mic): +10–+75 dB
TRIM
Input connected using TRS plug
(Line): −10–+55 dB
FADER Mute, −48.0 – +12.0 dB
NOTE
• These monitoring level settings only affect the output signals.
They have no effect on recorded data.
• Monitoring level settings are saved separately for each take. They
can be changed during playback. (→ P .50)
• Mix settings are not saved with the take when the recorded file
format is MP3.
F
Multi Track Field Recorder
a
to match the position of
a
will be
Explanation
This adjusts the
input level.
This adjusts the
monitoring level.
27